Solution To The Fault Of Fire Emergency Light
Oct 12, 2022
Many customers have encountered the problem of fire emergency light failure, which caused the alarm sound of emergency light failure to be very annoying. In fact, many failures may be caused by improper operation or environmental problems. Next, we will conduct a fire protection analysis for you. Troubleshooting of emergency light:
1. Reset power supply and exhaust method:
Directly pull out the plug of the fire emergency lamp, and completely use up the electric energy stored in the battery of the lamp until it is completely extinguished. After that, insert the plug into the power socket again and restart the lamp. Under normal conditions, the fault can be eliminated and the voice alarm will remind the lamps to return to normal working state. If it doesn't work, please empty it twice.
2. Shutdown method:
When it is found that the yellow warning light of the fire emergency lighting lamps is on and there is a voice fault alarm, the lighting lamps can be turned off by pressing the manual analog switch, or the length of the button can be adjusted by using the analog control according to the instructions of the lighting lamps. Adjust the mode of fire emergency lighting fixtures.
If none of the above methods is available, it indicates that the battery of the lamp is faulty or some circuits of the circuit board are short circuited. However, if other functions of the emergency lamp are normal, it is the sound of the alarm horn. You can remove the shell and put it inside. The alarm horn may break or be damaged.
