DF168-30D LED Emergnecy Kit For Highbay

Reduced power emergency output
Constant current output
Intelligent automatic charging system
Indicator shows a variety working modes
Built-in lithium battery pack
Self-test and emergency shutdown function
Compatible with LED fixtures with external driver

Send Inquiry

Description

DF168-30D LED Emergnecy Kit for Highbay

led emergency driver kits

Product Description

The DF168-30D module is compatible with LED fixtures with external driver, the output of the driver cannot exceed 400W or 8A.

The DF168-30D module is compatible with dimming driver.

AC power operation

When AC power is present, the LED driver outputs to the LED load, and this DF168-30D module is in charging mode and does not

output. The green LED light on to indicate that AC power is normal. The red LED light on to indicate that the battery is charging.

Emergency operation

The DF168-30D module automatically switches to working emergency mode when AC power is interrupted. All of the indicator lights go out. The DF168-30D module is battery powered and outputs to the LED light source, keeping the LEDs at 10-30% brightness for 60 -180 minutes.

Benefits of Self-Testing Emergency Lights.

Enhanced Safety: Self-test emergency lights provide a higher level of safety by continuously monitoring their own functionality. This ensures that the lights are always in proper working condition and ready to provide illumination during emergencies.
Time and Cost Savings: With self-testing capability, there is no need for manual testing, which saves time and resources. They still need to be visually inspected, however.
Compliance with Regulations: Many building codes and regulations require regular testing and maintenance of emergency lighting systems. Self-test emergency lights help businesses meet these requirements more efficiently and effectively.
Early Detection of Issues: The automated self-tests can detect potential problems, such as low battery levels or any failures, at an early stage. This allows for timely maintenance and repairs, ensuring the reliability and performance of the emergency lights.
Peace of Mind: Knowing that the emergency lights are regularly tested and in optimal condition provides peace of mind for building occupants, facility managers, and safety personnel.

Product Parameters

Input Voltage	AC90-180V,50/60Hz
Charging Current	Max.300mA
Output Power	10-30W
Output Voltage	DC140-300V
Lamp Power	Max. 400W
Emergency Time	60-180mins
Battery	11.1V Li-ion/12.8V LiFePO4/12V Ni-Cd Battery
Charging Time	≥24 Hours
Ambient Temperature	0~+50℃
Inverter Dimensions	24015075mm
IP Rating	IP65
Warranty	3 Years
Housing Material	Die-cast aluminum

Real Product Photo

DF168-30D Emergnecy Output 30W 90mins

DF168-30D Module Emergency Device

DF168-30D Module Emergency Lighting Kit

DF168-30D Module Emergency Driver Kit

Wiring Diagram

1--Connect to the live wire L and LED external driver's live wire L. This driver's live wire L can set a wall switch S.The wall switch only controls the main power, no function on emergency lighting.

2--Connect the neutral wire N and LED external driver's neutral wire N.

3--Connect the ground wire.

4--Connect the positive output of the driver.

5--Connect the negative output of the driver and the negative terminal of the light source.

6--Connect the positive terminal of the light source.

UFO 1

Product Dimension

240

Battery Type

111V

Indicator Light

product-751-1334

Green Indicator Light：On---Main AC power is normal. Off--Main AC power is interrupted.

Red Indicator Light：On--The battery is charging. Off--The battery is fully charged.

Yellow Indicator Light：On--The module is in an abnormal state, such as no battery connection, incorrect wiring, module failure and so on. Off--Normal.

Company Profile

product-1053-867

Our Factory

FAQ

Q: Are you trading company or manufacturer?

A: We are professional manufacturer specialized in LED emergency power pack, emergency lights , househould UPS and other emergency devices. And we trade our products with our clients directly.

Q: Can you do OEM and ODM?

A: Yes, OEM and ODM are both acceptable. The material, color, style can customize, the basic quantity we will advise after we discuss.

Q: Can we use our own logo?

A: Yes, we can print your private logo according to your request.

Q: Which shipping way can you provide?

A: We can provide shipping by sea, by air and by express.

Q: What's your after-sale service?

A: Our quality warranty period is two years. Any quality problem will be solved to customer satisfactions.

Contact Us

mike 13923878558