Can You Use A Portable Power Station While Charging It? Yes, With DF Bidirectional Inverter Technology
Nov 07, 2026

Can You Use a Portable Power Station While Charging It?
This is one of the questions our customers ask most often: Can an outdoor portable power station be used while it is charging? Will it overheat or drain the battery?
The short answer: yes. DF portable power stations use a bidirectional inverter design. Both AC220V and DC outputs are available whether mains power is connected or not. When mains power is present, the AC220V output is supplied directly from the grid. It does not interfere with charging and does not consume battery energy.
How to Operate Your DF Power Station
Built-in charger: The charging circuit is inside the unit. No external charger is needed. The AC220V input port is also the charging port.
Keep it switched on: Even if you only want to charge, the unit must be powered on. It cannot charge when switched off.
Three switches: Main power, display, and DC output. Press and hold the main switch until you hear a beep. Both AC220V ports are then live.
Display switch: Turns the screen on and off to read data. Turning off the display does not turn off the unit.
DC switch: Controls the DC output (24V / 12V / 5V, customizable).

Safety and Protection
Our LiFePO4 battery and BMS provide multiple protections, but please also follow these guidelines:
Keep away from fire and do not immerse in water.
Do not disassemble the battery or short-circuit the unit.
Total AC + DC load must not exceed the rated power. The unit is fully enclosed, and overload may cause excessive temperature rise or automatic shutdown.
The unit is rain- and corrosion-resistant, but this protection no longer applies once a port cover is open. In wet weather, use a shelter such as a tent.
Avoid direct, strong sunlight to prevent overheating and deformation.
We recommend that people with electrical knowledge operate the unit. Keep it away from children.

Cold-Weather Self-Heating
The unit has a self-heating function. Below 0°C it warms the battery automatically and stops at 10°C. It works only when the unit is switched on.
When mains power is connected: heating power comes from the grid.
When running on battery: heating power comes from the battery, so the longer it runs below 0°C, the more battery energy is used.
For best battery life, we still recommend charging above 0°C.
Storage, Shutdown and Transport
Shutdown order: main switch → DC switch → display switch. Disconnect loads and close the port covers.
Storage: Store in a clean, dry, ventilated indoor space at -5 to 35°C, away from corrosive substances, fire and heat. Recharge once every three months.
Transport: Pack at 20–50% state of charge. Protect from vibration, impact, crushing, sun and rain. Suitable for road, rail, sea and air transport.
Need a Portable Power Station for Your Market?
DC output voltages can be customized. Contact us for specifications, OEM/ODM options and quotations.







